Brew Safe Sanitiser Instructions

Brew Safe Cleaner Sanitiser has a variety of uses including for home brew equipment and bottles, and requires no rinsing after draining. 25g makes up to 5 litres of cleaning solution.

Instructions For Use, please read carefully.

Cleaning Fermenters and Equipment and Bottles:

Part fill your fermenting vessel with 5 litres of clean warm water and add 25g (equivalent to approximately 3 heaped teaspoons) of Brew Safe sanitising powder and stir until dissolved. Using a clean cloth in the solution wipe down the sides and lid of the fermenter. Equipment can be placed in the fermenter with the lid and swirled. Leave to stand for 10 minutes. Bottles can be cleaned in the vessel at the same time.

Remove equipment from the fermenter and pour away the solution – allow to drain, no rinse necessary. Ensure the steps are completed within 60 minutes.

Cleaning Bottles on their own: 

Put 5 litres of clean warm water into a sink or other suitable vessel and add 25g Brew Safe Sanitising powder and stir until dissolved. Part fill each bottle 1/3 with the solution and shake so that the liquid contacts all surfaces. Leave to stand for 10 minutes. Empty bottles and allow to drain – no rinse required. Ensure filling of bottles and sealing is completed within 60 minutes from starting to clean them.

Contains Sodium Percarbonate


Keep away from heat/sparks/open flames/hot surfaces – No smoking. Take any precautions to avoid mixing with combustibles. Wear protective gloves/protective clothing/ eye protection/face protection. If SWALLOWED call a poison centre or doctor/physician if you feel unwell. If IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If skin irritation occurs get medical advice/attention. 

CAS No. 15630­89­4

EC No. 239­707­6


Available in 200g resealable pouches - Buy Now